Course Content
Lessons
Status
2
2.21 Concrete production and supply
-
2.21.00 Contents
-
2.21.01 Summary and ICT learning objectives
-
2.21.02 Introduction
-
2.21.03 Procedures for dealing with changes in consistence
-
2.21.05 Procedures for dealing with lumps
-
2.21.04 Procedures for dealing with changes in uniformity and colour
-
2.21.06 Procedures for dealing with changes in mix proportions
-
2.21.07 Procedures for dealing with changes in temperature
- 2.21.00 Contents
- 2.21.01 Summary and ICT learning objectives
- 2.21.02 Introduction
- 2.21.03 Procedures for dealing with changes in consistence
- 2.21.05 Procedures for dealing with lumps
- 2.21.04 Procedures for dealing with changes in uniformity and colour
- 2.21.06 Procedures for dealing with changes in mix proportions
- 2.21.07 Procedures for dealing with changes in temperature
4
2.23 Ready-mixed concrete
-
2.23.04 Moving the materials
-
2.23.05 Proportioning the materials
-
2.23.06 Mixing the concrete – Types of concrete production plant
-
2.23.07 Ready-mixed concrete
-
2.23.08 Mobile & portable concreting plant
-
2.23.09 Cleaning of conceting plant and equipment after use
-
2.23.10 Maintenance of concreting plant and equipment
-
2.23.11 Calibration
- 2.23.04 Moving the materials
- 2.23.05 Proportioning the materials
- 2.23.06 Mixing the concrete – Types of concrete production plant
- 2.23.07 Ready-mixed concrete
- 2.23.08 Mobile & portable concreting plant
- 2.23.09 Cleaning of conceting plant and equipment after use
- 2.23.10 Maintenance of concreting plant and equipment
- 2.23.11 Calibration
5
2.24 Precast concrete
-
2.24.01 Contents
-
2.24.01 Summary and ICT learning objectives
-
2.24.02 Introduction
-
2.24.03 Factors affecting choice
-
2.24.05 Mould making
-
2.24.06 Requirements for concrete production
-
2.24.07 Compaction techniques
-
2.24.08 Manufacturing and curing
-
2.24.09 Handling and stacking
-
2.24.10 Safe handling
-
2.24.11 Receiving and storing on site
-
2.24.12 Erecting and installing precast concrete units on site
-
2.24.13 Fixing, fastening and lifting
-
2.24.14 Testing
-
2.24.15 Identification
- 2.24.01 Contents
- 2.24.01 Summary and ICT learning objectives
- 2.24.02 Introduction
- 2.24.03 Factors affecting choice
- 2.24.05 Mould making
- 2.24.06 Requirements for concrete production
- 2.24.07 Compaction techniques
- 2.24.08 Manufacturing and curing
- 2.24.09 Handling and stacking
- 2.24.10 Safe handling
- 2.24.11 Receiving and storing on site
- 2.24.12 Erecting and installing precast concrete units on site
- 2.24.13 Fixing, fastening and lifting
- 2.24.14 Testing
- 2.24.15 Identification
6
2.25 Formwork and falsework
-
2.25.00 Contents
-
2.25.01 Summary and ICT learning objectives
-
2.25.03 Definitions
-
2.25.02 Introduction
-
2.25.04 Formwork principles
-
2.25.05 Design and materials
-
2.25.06 Pressures on formwork
-
2.25.07 Formwork arrangements
-
2.25.08 Proprietary formwork systems
-
2.25.09 Pre-concreting checks
-
2.25.10 Line and verticality
-
2.25.11 Release agents
-
2.25.12 Formwork striking
-
2.25.13 Formwork handling
-
2.25.14 Formwork condition, repair and storage
- 2.25.00 Contents
- 2.25.01 Summary and ICT learning objectives
- 2.25.03 Definitions
- 2.25.02 Introduction
- 2.25.04 Formwork principles
- 2.25.05 Design and materials
- 2.25.06 Pressures on formwork
- 2.25.07 Formwork arrangements
- 2.25.08 Proprietary formwork systems
- 2.25.09 Pre-concreting checks
- 2.25.10 Line and verticality
- 2.25.11 Release agents
- 2.25.12 Formwork striking
- 2.25.13 Formwork handling
- 2.25.14 Formwork condition, repair and storage
7
2.26 Reinforced concrete
-
2.26.00 Contents
-
2.26.01 Summary and ICT learning objectives
-
2.26.02 Definitions
-
2.26.03 Loads on structures
-
2.26.04 Beams and slabs
-
2.26.05 Cantilevers
-
2.26.06 Columns
-
2.26.07 Walls
-
2.26.08 Design considerations
-
2.26.09 Thermal behaviour
-
2.26.10 Strength classes
-
2.26.11 Durability
-
2.26.12 Cover
-
2.26.13 Bond
- 2.26.00 Contents
- 2.26.01 Summary and ICT learning objectives
- 2.26.02 Definitions
- 2.26.03 Loads on structures
- 2.26.04 Beams and slabs
- 2.26.05 Cantilevers
- 2.26.06 Columns
- 2.26.07 Walls
- 2.26.08 Design considerations
- 2.26.09 Thermal behaviour
- 2.26.10 Strength classes
- 2.26.11 Durability
- 2.26.12 Cover
- 2.26.13 Bond