The Blog

Courses Stage 3 Practical Applications - Module 4

Course Content

Expand All | Collapse All

Lessons Status

1

3.25 Precast concrete

3.25.00 Contents

3.25.01 Summary and ICT learning objectives

3.25.02 Introduction

3.25.03 Principles of precast concrete production

3.25.04 Layout of facilities for the production of precast concrete

3.25.05 Design/drawing office

3.25.06 Production control

3.25.07 Reinforcement cutting, bending and folding

3.25.08 Mould fabrication

3.25.09 Batching, mixing and transporting fresh concrete

3.25.10 Casting

3.25.11 Finishing

3.25.12 Curing

3.25.13 Marking

3.25.14 Lifting and handling concrete products

3.25.15 Storage and stacking

3.25.16 Inspection, sampling and testing

3.25.17 Quality management and control

3.25.18 Loading and transporting

3.25.19 Erection and assembly on site

« ‹ › » page 1 / 2

2

3.26 Concrete repairs

3.26.00 Contents

3.26.01 ICT learning objectives and Summary

3.26.02 Introduction

3.26.03 Repair situations

3.26.04 Inspection procedures

3.26.05 Types of repair materials

3.26.06 Performance characteristics and test methods for repair materials

3.26.07 Repair of cracks and voids

3.26.08 Surface repairs

3.26.09 Repair of damage from reinforcement corrosion

3.26.10 Electrochemical techniques

3.26.11 Surface treatment

3.26.12 End of Unit Test

3

3.27 Concrete floors

3.27.00 Contents

3.27.01 Summary and ICT learning objectives

3.27.02 Introduction

3.27.03 Ground floor slabs

3.27.04 Elevated floor slabs

3.27.05 End of unit self-test

4

3.28 Concrete roads and ground slabs

3.28.00 Contents

3.28.01 Summary and ICT learning objectives

3.28.02 Introduction

3.28.03 Pavement types and structure

3.28.04 Foundation construction with unbound material

3.28.05 Types, constituents and properties of HBMs

3.28.06 Mixing, compacting and placing HBMs

3.28.07 Joints in CBGM and RCC

3.28.08 Tests for HBMs

3.28.09 Specification of HBMs

3.28.10 Production control and conformity testing

3.28.11 Rigid and rigid composite construction with PQC

3.28.12 Constituents of PQC

3.28.13 PQC specification, properties and proportions

3.28.14 Joints and joint assemblies in PQC

3.28.15 Placing PQC

3.28.16 Finishing and texturing PQC surfaces

3.28.17 Specification of surface levels and finishes

3.28.18 Acceptance, production control and conformity tests for PQC

3.28.19 End of unit self-test

5

3.29 Plant

3.29.00 Contents

3.29.01 Summary and ICT learning objectives

3.29.02 Introduction

3.29.03 Automatically-controlled production plants

3.29.04 Autographic recording systems

3.29.05 Control of water content and consistence

3.29.06 Plant for transporting concrete

3.29.07 Plant for placing concrete

3.29.08 Plant for compacting concrete

3.29.09 Plant for finishing concrete

3.29.10 Compacting and finishing special concretes

3.29.11 Conclusion

3.29.12 End of unit self-test

6

3.30 Planning, organisation, supervision and safe working practices

3.30.00 Contents

3.30.01 Summary and ICT learning objectives

3.30.02 Introduction

3.30.03 Parties to a construction contract

3.30.04 Project management

3.30.05 Training

3.30.06 Quality management

3.30.07 Concreting in abnormal conditions